Product Description

Supplying tensioner pulley Hydraulic Clutch release bearing ,release bearings In China
 
Products details:

Bearing NO. Application
FCR55-1/2E MitsubishiV31
FCR55-17-11/2E MitsubishiV32
58TKA3703B MitsubishiV33
31230-35090 TOYOTA
31230-35070 TOYOTA
50SCRN34P-4 TOYOTA
50SCRN40P TOYOTA
44TKZ2801 CZPT 8A,Xiali
31230-36150 TOYOTA
31230-60130 TOYOTA
90363-38-0 CZPT 591 Engine
54TKA3501 Isuzu
CT70B Isuzu,Mitsubishi
BC12S4SB Isuzu,Mitsubishi,TOYOTA
RCT38SLi1 Isuzu,Mitsubishi,TOYOTA
24TK308B2U3 Isuzu,Mitsubishi,TOYOTA
CT52S TOYOTA
CT52A-1S
Land Rover Clutch bearing
RCTS28SA TOYOTA,IMPALA
RCTS338SA Changan,Changhe 465Q Engine 465Q
FCR48-39-6/2E(3303) Changan star 474Q,472Q Engine 474Q
44TKB2821 Xihu (West Lake) Dis. B12 Engine B12
48RCT3321F0 Xihu (West Lake) Dis. Sunshine 465Q Engine 465Q
47RCT3-0 Isuzu
78TKL4001 Isuzu
8-97089-652-0 Isuzu
60TKB3506 TOYOTA
31230-32060 TOYOTA
MD706180 Mitsubishi
770571298 Peugeot
7799778 FIAT
445329AC Peugeot
CR1207 Peugeot
13505-87702 Xiali,Geely
TOYOTA 8A,Xiali 8A
13503-10011 / 13505-64571 TOYOTA
B12 Air conditioning tension,Xihu (West Lake) Dis. ,B12
B12 Engine tension,Xihu (West Lake) Dis. B12
24810-33571 Hyundai Atos GT-10090
JUP57-54+JF598 BYD F3 F3
13505-87205 Daewoo,IMPALA 474Q ,474Q
IP12810A81400-000 Changhe dipper
Chery QQ0.8 QQ0.8
Chery QQ1.1 QQ1.1
12810-3571 465Q\462Q Engine bearing 465Q
About our company:
 
     HangZhou Sujun Machinery is a integrated group of automotive spare parts in research ,design  manufacture and    marketing .Products Contain clutch release bearing & hydraulic release bearings,belt tensioner & pulley wheel bearings ,hub unit s,tapered roller bearings, and automotive electric parts(ingition coils ,ignition weir sets, sensioners , fuel injection and so on ) and other sereis automobile spare parts.            
We have been committed to the concept of “professional, integrity, innovation, service” Product best-selling Europe and the United States, the Middle East, southeast Asia and other countries and regions.       
With the rich experience , advanced    technology  and strict management we won the domestic and abroad customers consistent high praise.      
we are willing to establish a long-term cooperative relationship with cstomers from all over the world with the  principle  as “good quality , efficency  integrity, win-win”.             

should you have any questions pls do not hesitate to contact us

Types of V-Belts and Their Properties

A v-belt’s inside length and pitch are determined by measuring along the bottom side. The included angle of a v-belt is measured from its flanks when it is extended. Most v-belt sections are 40 degrees. There are different types of v-belts, and the dimensions of each are standardized by different organizations. This article will introduce the different types of v-belts and their properties.

Notched v-belts reduce bending stress

Notched V-belts reduce bending stress by reducing the axial length of the belt by 2 or more notches. These notches are characterized by different profiles, which differ in the pitch angle and the inside length. ISO and DIN standards are followed by the manufacturers of these belts. Notched v-belts are used on industrial machinery in countries other than the US.
Compared to the standard V-belts, notched ones are designed to resist bending stress better and offer better heat dissipation. They also last longer and run cooler than standard V-belts. Furthermore, they are about 2 percent more energy efficient than their standard counterparts. Therefore, notched V-belts are a viable replacement for standard V-belts.
Notched V-belts are commonly used in industrial applications because of their low price, ease of installation, and availability of many sizes. Another advantage of notched V-belts is that they provide more wedging force and higher load capacity. Notched V-belts have a wider v-groove than flat ones, which makes them more effective for heavy-duty applications.
Notched V-belts also provide better traction. They reduce bending stress, which is beneficial for preventing fatigue and tearing of v-belts. Additionally, v-belts can be installed in an existing equipment to add more performance. And with proper maintenance and installation, notched V-belts will provide trouble-free service for many years to come.

Ribbed v-belts reduce heat dissipation

Various kinds of v-belts are available for varying applications. The more popular types are the fractional horsepower and the double-V. Fractional horsepower v-belts are designed for light-duty applications, such as machine shop equipment and household appliances. The common sectional names are 2L, 3L, 4L, and 5L. The L in each of these belts refers to the top width of the belt, multiplied by 1 eighth inch.
Unlike conventional belts, ribbed v-belts are flexible, making them ideal for use in vibrating loads. They reduce heat dissipation and can be ordered in single or multiple sets to match your application. However, ribbed v-belts should not be mounted on deep-groove sheaves, as this can cause the belt to turn over. If you use deep-groove sheaves, the risk of rupture is very high. Deep-groove sheaves can also cut banded belts. Extremely worn sheaves can also cause the belt to rip.
The 2 types of ribbed v-belts differ in their construction and application. While both types have trapezium cross-sections, they are similar in that they are made of polyurethane or other durable materials. Ribbed v-belts have an additional layer of fabric on the elastomer core for reduced noise and better heat dissipation.
Ribbed v-belts are available in a variety of sizes, including trough v-belts. Their cross-sections are categorized by their top and bottom widths and depths. The included angle of most v-belt sections is approximately 40 degrees. Different types of v-belts have different cross-sections, and these cross-sections are standardized by various organizations.
As the load increases, a ribbed v-belt will wedge into the groove and decrease the amount of friction needed to maintain the correct torque. Flat belts can track off the pulleys due to friction. However, V-belts are more stable and require less width than flat belts. The main advantage of ribbed v-belts is their increased efficiency.
The global-local finite-element model is also used to calculate the maximum and minimum J-integrals during a belt’s running cycle. The data is then used to evaluate the durability of ribbed v-belts in various applications. The numerical models used for the calculations involve a ribbed V-belt with 5 full ribs.

Cogged v-belts increase lateral rigidity to reduce belt whip

Cogged v-belts are designed for maximum performance and durability on even the harshest drive systems. These belts are made from high-modulus polyester cords that resist hardening and stretch and provide superior balance and strength. They also feature raw-edge sidewalls to reduce slip and drive vibration. In addition, they have specially-formulated rubber compounds for oil resistance. CZPT Cog-Belt offers substantial savings in downtime, energy consumption and horsepower.
A double cogged v-belt combines the benefits of cogged and double vee-belts. Its bonded reinforced tie band offers enhanced flexibility and reduces belt whipping in multiple-belt drives. Double cogged v-belt dimensions vary depending on the standards of the manufacturer. Regardless of the type, you’ll want to use a belt that is aligned correctly.
Standard v-belts are also known as wrapped or raw edge v-belts. Wrapped V-belts feature fabric covers above and beneath the cord to increase lateral rigidity and reduce belt whip. Cogged V-belts also have fabric covers to prevent wear on the core and increase the belt’s operating temperature. They’re ideally suited for applications that require high-temperature operation.
Cogged V-belts can significantly decrease energy consumption and improve power transmission capabilities. They also have a bias-cut cover stock that provides axial and lateral stability while preserving the cord integrity. A fiber loaded cogged construction offers optimum flexibility while minimizing heat buildup. It can be installed on any type of drive, including chain conveyors and industrial-grade machines.
The two-layer tie-band permanently bonds multiple belts together. This provides maximum cord support, heavy shock absorption, and stability. The belts are also engineered with patented banding processes that eliminate belt turnover and distribute load evenly across the drive. CZPT Cog-Band Belts minimize belt whip and provide stability. They also minimize belt turnover and rollover in heavy-duty industrial applications.
A classic v-belt is the most common and economical belt. Its nominal dimensions are 1/2″ to 1-11/2″ wide and 16″ to 400 inches long. The width is usually 40 degrees. Different organizations use different cross-sections to classify v-belts. The following table provides a general comparison of the 2 types. The Cogged V-Belt is designed to reduce belt whip by increasing the lateral rigidity of the belt.

Cogged v-belts provide superior environmental resistance

The patented design of the Dayco V-Belt provides maximum power transmission while combining the benefits of a cogged belt and raw-edge construction. The belt’s top cogged design helps increase air flow around it, preventing deterioration and extending its useful life. The belt’s three-ply design features neoprene impregnated fabric for superior durability and a specially-formulated polyester cord for increased strength and stability.
A variety of v-belts are available, with cogged and notched versions presenting unique characteristics. Cogged V-belts are more flexible than uncogged versions and feature ‘X’-shaped grooves for enhanced heat dissipation. Cogged V-belts are interchangeable with conventional v-belts, although their ‘X’ design is most common. Hexagonal v-belts are a popular option for applications where traction is needed.
Another type of Cogged V-belt is designed specifically for outdoor power equipment. This v-belt is brown, with smooth clutching covers. Its aramid cord is very strong and provides superior durability in adverse conditions. Cogged V-belts can withstand severe shock loads and are therefore ideal for outdoor power equipment. Furthermore, they offer superior environmental resistance, minimal stretch, and a long service life.
A Cogged V-belt is composed of tensile cords that are supported by a rubber stock. Different manufacturers use different synthetic rubber stocks for this purpose. These materials help to extend the belt’s operating temperature range and resist premature failure. In addition to tensile cords, the belt’s body is covered with a fabric cover. The fabric is treated to form a chemical bond with the core materials, which allows it to withstand constant bending.

Product Description

Company Profile
ZheJiang YiFa casting and forging Co.,Ltd.is a comprehensive enterprise integrating the production,sale and service of rope chain lifting accessories,metal tools,power cord accessories and other casting and forging products.The company consists of 2 subsidiaries and 6 professional entities.Product quality conforms to various international standards.

We have more than 20 years of export experience,competitive prices and high quality products,so that our products are exported to all over the world, well received by customers around the world,also makes us an excellent supplier in the global market.

At the same time,we also provide professional customized products:
• On-demand products (special drawings)
• Special Markings on products
• Special packaging

The company adopts ISO9001:2000 quality management system.
Company tenet:quality first,customer first,integrity and innovation.
We believe that we can establish long-term and stable friendly business relations with your company.Welcome to contact us.
 

EU. Safety Type Load Binder
 

FAQ

1. Are you a manufacturer?
Yes, we have our own factory workshop and machines, we control every step for production.

2. Do you have stock products to sell?
For some regular products, we have stock;but usually we supply customized products.

3. What is the quality of your products?
All of our manufacturing factories are ISO 9001 certified.Nowadays we successfully supply important players on the worldwide markets.Our products comply with the various demanding National and International standards. 

 4.What about Delivery Time?
In view of the particularity of the rigging industry, the surface of the product and the typing of the product itself must be customized at any time according to customer requirements.Please contact customer service for delivery time.

The Advantages and Disadvantages of Neoprene Timing Belts

The timing belt is an important component of an automobile engine. Made of special materials, this belt coordinates the rotational motion of the crankshaft with the camshaft. The coordinated precision is essential for sustainable combustion, and ensures that the valves in the combustion chamber open at the right times. Timing belts determine the engine’s pace, so it is essential that they perform at high synchronicity and strong enough to operate in extreme conditions.

Fabric timing belt

A timing belt is made of a yarn that has been crimped and woven into a mating surface, called the engagement surface. This yarn, known as the warp, must be able to stretch from a substantially flat state along irregularities in the mold. It must be flexible enough to stretch by several tens of percent under low load conditions. The warp yarn of a timing belt is made of synthetic fiber and is crimped into the right shape to be stretched easily.
This fabric can be used without thickening the base cloth. It can contain a large number of warp threads, and its wear resistance can be enhanced over time. The timing belt of the present invention does not crack or wear out after a long time of use. The base cloth does not wear out, which allows the timing belt to last for a long time. This makes it an extremely durable material. To learn more, read on.
The teeth of a timing belt are made of tough rubber and a nylon fabric facing. The fabric is coated with a plastic compound that gives it its shape and covers the cord. The materials used to make these belts vary, but all are strong and durable. They are also suitable for high-load applications. In addition to nylon timing belts, strongbelt premiums are also available. In addition to nylon and neoprene timing belts, they are also compatible with RPP and HTD pulleys.
The teeth of timing belts are made of high-strength polychloroprene elastomer. The teeth are made of a special manufacturing process that ensures good adhesion. The facing fabric is made of low-elongation glass cord and is covered by a polyamide fabric that has a low coefficient of friction. If you need an exact fit, you can buy a high-quality belt from TransDev.

Neoprene timing belt

When it comes to dependable drive belts, neoprene is hard to beat. It’s widely used in insulated clothing and weather stripping, and has been a key component in the development of timing belts since the late 1970s. And because it’s so hardy, neoprene timing belts are incredibly reliable. Here are a few reasons why. Neoprene is the most durable synthetic material for timing belts, and these 3 reasons should not discourage you from purchasing a new neoprene timing belt.
Neoprene timing belts are made of a high-quality chloroprene compound with a hardness of 74 Shore A. The high-strength glass fiber strands in the belt’s body transmit high power while enhancing its flexural strength. In addition, it’s covered with a high-strength polyamide fabric to reduce friction and protect contact surfaces from wear and tear.
Unlike neoprene, polyurethane synchronous belts are resistant to temperature and abrasion. Polyurethane timing belts are resistant to acids and chlorides, and exhibit excellent abrasion resistance. A neoprene belt can be used in high-speed applications, and can withstand extreme temperatures. However, the resistance of polyurethane to abrasion is not as good as that of neoprene.
The 2 most common types of timing belts are rubber and urethane. Rubber is the least expensive and quietest, and is the least flexible of the two. Neoprene is also highly elastic and does not retain its shape when it’s stretched, making it a popular choice for applications in manufacturing, agriculture, and robotics. They are also great for applications where precision and motion control are important. These properties make timing belts extremely effective in leading the industry toward its goals.

Chain timing belt

Traditionally, a vehicle’s timing system consists of a timing belt or chain. These components keep the engine’s intake and exhaust valves in the proper order. When these components go bad, it can ruin the engine in seconds. But there are advantages and disadvantages to each of them. Read on to learn about the pros and cons of each type of timing system. Here are some examples. Chain: A timing belt is generally made of reinforced rubber.
Chain: A timing chain is generally found in heavy-duty vehicles with higher torque. This type of timing belt is also found on many cars and SUVs with 4 cylinder engines that do not require a lot of torque. Unlike timing belts, timing chains are more durable and will last longer than their rubber counterparts. But there are certain things to keep in mind when replacing a timing belt. Make sure to change the oil regularly to avoid premature wear.
Chain: A chain is easier to maintain than a timing belt. It does not change length in response to temperature. And it requires a smaller tensioner. However, this also means that the timing belt is more prone to breaking. It can jump out of place if oil is flowing along it, causing an engine malfunction. If this happens, you’ll have to replace the entire timing belt and the engine will not work correctly. That’s why replacing a chain is so important.
A timing belt is a critical part of an engine. A failed timing belt can cause catastrophic engine damage. It can slip and break, colliding with the piston and valves. Fortunately, there are a variety of ways to check your timing belt. But a good rule of thumb is to replace it as soon as possible. You’ll also need to remove the front engine cover and any other components that may be in the way. In some cases, the engine might even have to be moved.

Trapezoid shaped teeth

In terms of tooth profile, there are 2 main types of timing belts: the curvilinear and trapezoidal types. Curvilinear timing belts are more rounded and less likely to result in excessive tension loss. These types of timing belts are also more prone to backlash and reduce accuracy. Here’s how they differ from each other. These 2 types of belts share similarities but differ in important ways.
Older timing belts generally have trapezoidal-shaped teeth, but newer types use curved teeth. Curved teeth are less prone to wear out quickly and last longer than straight ones. The trapezoidal teeth also tend to wear out more quickly at higher speeds. As a result, they’re only suitable for cars that get very little use. If you’re planning on using your timing belt frequently, you may want to choose a new 1 with curved teeth.
Curvilinear teeth are designed to alleviate the stress concentrations caused by trapezoidal tooth profiles. They also have a greater depth and reduce ratcheting. In addition to their efficiency, curvilinear timing belts are quieter than their trapezoidal counterparts. And they’re a little bit more expensive than their trapezoidal counterparts. So, what’s the difference between these 2 types of teeth?
Timing belts have a tendency to favor the tracking of an “S”-shaped twist. As a result, a trapezoid-shaped timing belt is more likely to keep the engine in sync. A good quality timing belt will help you achieve this. If you don’t, consider replacing your timing belt with a metric-styled one. That way, you’ll get the best performance out of your belt.

Other types of timing belts

Timing belts are essential for operating your vehicle’s engine. These belts connect the engine’s crankshaft and camshaft. The belts synchronize the timing of the engine’s valves and pistons to prevent damage. Previously, the belt was referred to as the “gilmer drive belt.”
There are 3 basic designs for timing belts. Some are shaped like a trapezoid, while others have a curvy tooth shape. Timing belts with this tooth design are generally more efficient for force transmission, although they suffer from backlash. These teeth also wear quickly at high speeds, which can make them prone to noise. In order to solve these issues, manufacturers now offer belts with curved teeth.
Another popular type is polyurethane. These are resistant to oil and high temperatures, and are energy-efficient solutions. Polyurethane timing belts offer increased elasticity and load capacity, which are important for optimal torque production. These belts are favored by a variety of industries because of their ease of cleaning and maintenance. They can be used for power transmission systems, as well as in roller conveyor systems. However, fabric timing belts are best used when acceleration forces are high.
Other types of timing belts are not always as durable. V-Belts have teeth-like structures on their surfaces and work under constant speed. They are typically a lighter option, but have similar disadvantages. They are more expensive than chains and lack the flexibility of customizing. Unlike chains, timing belts are sold in predetermined length loops. Their pitch is easily identified. It is a key indicator of whether or not they are suitable for a specific application.

Product Description

PP/PET Strapping Sealer Long Arm Carton Packing Portable Strapping Tool

Product Description

Company Profile

Xutian (Sunpack) was established in 1997 with the goal of providing the best strapping machine in the industry at competitive prices.
Xutian (Sunpack)is a group company with 3 branches located in HangZhou, HangZhou and HangZhou. We dedicate to end of line package development for years. We have more than 30 staff in our RND department . We carry banding machine, strapping machine, pallet wrapper, case sealer and manual strapping tool in our range.
Our goal is to make every customer completely satisfied with the best packaging machinery and services through continuous improvement and employee involvement.
We believe that innovation is key to our success. Through a firm commitment to research and development, we have earned a reputation for being at the forefront of packaging innovation. We provide our customers with advanced solutions that increase production efficiency, improve load integrity and reduce operating costs. Over the years, we’ve continuously refined our existing products and created new ones to take advantage of evolving technologies and to meet our customers’ ever-changing needs.
We appreciate your interest in our company and will be in touch with you as soon as possible to discuss your specific needs

Exhibition

Our Service

1.Fast parts delivery
  Within 3 days to deliver required parts

2.Fast response
Within 24 hours to give email reply or calling-back and solve the claim

3.24 hours in hall service
Within 24 hours to arrive in cusotmer’s location

4.Agent call-in help
Local agents could help for Emergency cases

5.OEM SERVICE
OEM design for all customers

What Is a V-Belt?

What is a v-belt? It is a rubber belt that is trapezium-shaped and has an elastomer core that holds the parts together. Its elastomer core is generally made of polyurethane and has good shock resistance and flexural strength. V-belts sometimes have 2 sections, 1 of which is a compression rubber and the other cushion rubber. They can be narrow or wide, depending on their use.

Classical V-belts replace leather belts

Classical V-belts are a popular choice among truck drivers because they are more durable. They are typically made of polymer or rubber, with fibers from other materials added for reinforcement. These belts are a good replacement for leather belts and offer many benefits. They are durable, offer excellent temperature and oil resistance, and are easy to use. If you’re considering replacing your current belt, consider buying a replacement belt made of the same material.
Most classical V-belts are used individually and come in A and B sizes. They are rarely used in single-belt drives. Buying several A or B belts instead of 1 C belt can save money. The narrow V-belts also provide higher power ratings. This is due to their narrow profile, which places more of the reinforcing cord under the sheave. Narrow V-belts are ideal for heavy duty applications.
When you’re replacing an existing V-belt, you’ll need to measure its top width and circumference. Once you’ve determined these parameters, you’ll be able to select the right replacement belt. Make sure to take measurements of the belt’s dimensions and top width before ordering. Using these measurements will help you determine the best size for your new belt. You’ll be able to tell whether you need a larger or smaller belt after measuring the top width and circumference.
If you’re looking to replace your leather belt with a belt made of synthetic material, a Classical V-belt may be the right choice. Classical V-belts are available in many materials and are more durable than leather. And because they are so versatile, they are the perfect replacement for your current belts. You’ll be glad you did. So, don’t be afraid to experiment with this type of belt. They’ll work well in any setting, including heavy equipment.
When buying a Classical V-belt, be sure to check the dimensions and type of belt you choose. These are available in notched or cogged designs. Notches are a great way to reduce bending stress. Notches also help dissipate heat from the belt, a major factor in premature belt failure. Notched V-belts are designed to balance a combination of flexibility and tensile cord support. They are spaced properly to minimize cracking and undercord damage.
Unlike leather belts, Classical V-belts are made of synthetic materials. They are easy to install, have a wide range of sizes, and come in light to heavy-duty varieties. The V-belt’s trapezoidal shape helps it track in the grooves of pulleys and prevents it from slipping while in use. It also helps in reducing power loss, since it’s easier to grip the pulleys than leather.

Narrow v-belts are more efficient

There are 5 basic types of V-belts. Their differences in cross-sectional size and power transmission make them superior to multiple single v-belts. The diagram below shows these types and how each differs from 1 another. The included angle of each belt is 40 degrees. The lower number indicates the more efficient version. Narrow V-belts are generally less expensive. Narrow v-belts are generally more efficient than wider belts.
There are several factors that influence a V-belt’s efficiency. Although the efficiency is high when a new belt is installed, the efficiency can drop to the low nineties. However, these belts are relatively resilient, and even with lower efficiency can function properly. Even if the efficiency of a V-belt is lower than it could be, it will still function. In fact, the higher the efficiency, the more energy it will save.
The first is the type of pulley. A narrow V-belt is more flexible than its wider counterpart. The belt pitch diameter is 32deg or 38deg. In addition, the belt can be cogged for added flexibility. In this way, the belt will not touch the bottom of the groove, but will only contact the inclined flanks. Without this wedge effect, the belt’s total friction force is higher. This means that it can transfer higher forces.
While a V-belt looks like a glorified rubber band, it has undergone tremendous technological development since it was first used in 1917. Synthetic rubber compounds and other cover materials have replaced rubber in the belt. New construction methods, tensile cord improvements, and cross-section profiles have resulted in a confusing variety of V-belts. Their differences, however, are based on the type of application for which they’re used.
Another type of V-belt is the raw edge variety. This type of belt is commonly used in manufacturing facilities. This type of belt requires less energy to operate. The raw edge also resists hardening. This is important since unmatched flexibility results in a smooth belt. Also, notched V-belts reduce vibration by 80%. Further, angular misalignment increases the risk of premature failure of a V-belt.
These belts differ in their overall design. While conventional V-belts are more common, narrow V-belts are more efficient and versatile. They are made of different types of rubber and reinforcements, which combine to create a trapezium-shaped cross-section. They can handle fractional loads and even 500 horsepower. Furthermore, their durability is largely dependent on their ability to withstand poor operating conditions.
Double-sided v-belts have unique features. These belts are used in applications with multiple pulleys. They can be operated clockwise or counter-clockwise. They can also be used to drive around multiple reverse bends. Further, they are more efficient and quieter than their counterparts. Finally, double-sided v-belts have 2 compression cores. The tension cord runs through both sections.

Double cogged v-belts increase lateral rigidity to reduce belt whip

A double cogged v-belt is a hybrid of a traditional double versus a cogged vee-belt. These belts are useful for applications that require a large amount of flexibility without compromising durability. The double cogged design also allows the belt to follow a serpentine path. The varying dimensions of a double cogged v-belt depend on manufacturer standards.
A v-belt is measured by defining the centerline, the inside length of the v-belt, and the pitch line, which is the distance between the top and bottom sides of the trapezium. The width and height of a v-belt are defined by its cross-section. Each cross-section is given a different designation, including the width and height.
A standard V-belt is a v-belt with a fabric cover. It provides firmness in a smaller space and is less prone to belt whip when used in heavy-duty applications. Its slim profile and light gauge tensile cord make it suitable for many industrial applications. The standard length of a double cogged v-belt varies from 530 to 3,000 mm.
Single cogged v-belts are commonly used in manufacturing machines that operate in close proximity to 1 another. Single cogged v-belts increase lateral rigidity and reduce belt whip. They are also ideal for heavy-duty applications, such as in mining or quarrying. Double cogged v-belts also increase lateral rigidity to minimize belt whip.
The elastomer core of a v-belt is surrounded by tension cords. These tension cords are embedded into the rubber compound, creating a composite structure that provides a high degree of shock resistance and flexural strength. The tension cords are often made of steel, polyester, or aramid fibers. This material makes it much stronger and more durable.
A double cogged v-belt is a highly rigid option for applications where lateral rigidity is an important concern. The double cogged design also increases lateral rigidity to reduce belt whip and enhances power transmission efficiency. Double cogged v-belts also offer positive slip-proof engagement. These belts are also easier to maintain, require less maintenance, and require no lubrication.

Product Description

The item is a simple and practical  roller in 50mm wheel diameter, which are mainly made of durable hard stainless steel. The loading capacity of this pully can up to 400kg, manufactured in strict process, will provide you the most convenience for work.

1. How do we control quality?
a) Pay attention to adaptation for manufacture process 
b) Approval report for shipment 
c) Third party inspection is accepted
d) Keeping quality guarantee for a long period
e) Guaranteeing quality inspection of each product before assembly and packing.
f) Comply with ISO 9001
2. Are we a factory or a trading company?
We are a factory manufacturing .Our products mainly consist of: forged riggings, hoisting pulley block, clevis hooks, eye hooks, safety hooks, swivel hooks, shackles and so on. With the passed 10 years of hard work and pursuit of better quality.
3. What are our advantages over others?
a) HangZhou SINCERE METAL PRODUCTS COMPANY could make the clients’ ideas to be actual products with support from related engineers from different fields.
b) Producing and designing forging, casting and stamping parts has made our company in a strong position in the OEM and ODM market.
c)  HangZhou SINCERE METAL PRODUCTS COMPANYbusiness is to help the overseas clients to get high quality products with fair price in China.
d) Any request from the clients would be treated carefully by our experienced staff, the quality of any order would be highly controlled by our skilled engineers.
e)   HangZhou SINCERE METAL PRODUCTS COMPANY teams would like to welcome clients from home and abroad to work for the CZPT situation and reach our target: Making Business More Fun!
Certifications

Replacing a Failing Drive Belt Tensioner

A failing drive belt tensioner can be extremely costly. Here’s what to look for and what to do if you suspect yours is bad. In addition, you’ll learn how to identify Idler pulleys and repair it yourself. If the tensioner is failing, you should replace the belt, as well as the Idler pulleys and shaft bearings. But what if the tensioner isn’t faulty?

Symptoms of a bad or failing drive belt tensioner

If your car’s drive belt is not moving smoothly, the pulley may be at fault. Ideally, the tensioner pulley should move away from the engine when the car starts. However, if it stays put or starts to move toward the engine, it’s time to replace the tensioner. The belt may also start to exhibit different wear patterns, such as the uneven wear of the sprockets, bearings, and springs.
If the serpentine belt begins to look loose and the engine loses its luster, the problem is most likely the bad drive belt tensioner. This issue will result in engine vibration. A faulty drive belt tensioner may also lead to a faulty spark plug, which prevents fuel from burning in the combustion chamber. This issue will likely require an engine diagnostic tool, such as an OBD2 scanner, to determine the cause of the check engine light.
Another sign that your drive belt tensioner is failing is a chirping noise. This noise can occur intermittently or constantly, and it may signal a problem with the pulley. In some cases, a faulty pulley may even cause your engine to misfire. Additionally, you may notice that the engine won’t start, even if you engage the starter motor.
In addition to the noise that may come from a failing tensioner, the bad belt tensioner may cause your serpentine to fail. In addition to the noise, this can also lead to overheating of the engine, which can result in costly damages. In addition to causing engine damage, a bad belt tensioner won’t reserve the minimum tension it needs to do its job and may even exceed it, causing the belt to wear out much faster.
If you notice any of these symptoms, it may be time to replace the drive belt tensioner. You can find a replacement OEM part online at a discounted price, as they’re available in wholesale quantities. A Mazda engine typically has no other parts blocking the serpentine belt path, so you can easily find the part you need. After replacing the drive belt tensioner, you’ll need to replace the serpentine belt as well.

Cost to replace a drive belt tensioner

Depending on the location and type of vehicle, replacing a drive belt tensioner can cost between $235 and $267. Some repairs may require other parts, such as a serpentine belt or tensioner housing. RepairPal’s Fair Price Estimator can help you get an accurate estimate for your particular vehicle. You can also contact HomeX, a virtual repair shop that can fix simple issues like loose drive belt tension.
It’s a relatively simple DIY job for most cars. An experienced mechanic will be able to replace the belt in a half hour or less, depending on the type of car and how many parts are affected. Depending on the complexity of the repair, the labor to replace the drive belt tensioner could cost anywhere from $50 to $170. The labor to replace the drive belt tensioner is typically included in the quoted price, but some auto shops may charge more to replace other car parts as well.
Replacing the drive belt tensioner is a relatively easy task. While the process might take an hour or more, it will be worthwhile in the long run. Regular inspections can prevent costly repairs by identifying problems before they cause major damage. A car’s belt is essential to the operation of the engine and can’t be operated without it. Changing it can save you money, as it will save you from spending extra on unnecessary parts.
Thankfully, there are plenty of tools available to help you replace your drive belt. While it may not be the easiest repair, it will still cost less than a mechanic’s service call. It is better to replace the belt early than to wait for the vehicle to break down, as this will prevent more expensive parts from breaking. You may also consider investing in a premium belt, which will give you twice as much mileage as a cheaper one.
While a drive belt tensioner is generally considered a wear-and-tear item, it is a part that should last the entire life of the vehicle. You can expect to replace the drive belt tensioner no earlier than 125,000 miles, but it is better to do it early if your car isn’t that old. And it doesn’t hurt to check the owner’s manual for directions on how to replace the drive belt tensioner.

Idler pulleys

Idler pulleys may seem like a minor part of your car, but their important job is to keep various components in good working order. Fortunately, they are inexpensive and don’t need much maintenance. If 1 pulley fails, it is best to replace all of them. However, it is not always easy to check idler pulleys yourself. It’s recommended that you visit a professional auto repair shop that is ASE-certified to inspect and replace the idler pulley.
Depending on the size and type of idler pulleys you need, you’ll have to purchase 2 or 3 pieces. You’ll need to purchase a pair of pliers for this part, as well as a tensioner pulley wrench. The cost of a replacement idler pulley will vary by make and model, but you can expect to pay between $40 and $200. These prices don’t include taxes or fees. Because they are so essential to drive belts, it’s worth investing in 1 or two.
Idler pulleys are a vital part of a car’s engine. They’re found underneath the hood and are usually 2 to 4 inches in diameter. They run over a roller that’s used to tension the belt. The belt is wrapped around a series of engine parts, and the idler pulleys are a complement to each other. You may not need an idler pulley on your car, but your mechanic will install it for you if you don’t.
The idler pulleys for a belt tensioner are crucial parts of your car’s engine. If they are worn down, the belt is likely to move loosely over them. Corrosion may also make the idler pulley move less freely. If the idler pulley is slipping, the belt may jump over the pulley, and the squealing noises will indicate a serious problem.
The idler pulley is a pivotal part of the engine’s power train. It redirects the path of the serpentine and timing belts, so that they can make optimal contact. The larger the contact patch, the more power the belt will transfer. The idler pulley can also improve the vehicle’s performance. It is a vital part of the engine, so make sure you check it frequently and install it correctly.

Repairing a drive belt tensioner

Replacing a drive belt tensioner is relatively simple. While your belt may need to be replaced, other parts of your engine may also need to be fixed. Typically, the tensioner will be replaced along with the pulley, as both parts are prone to malfunction. Replacing the drive belt tensioner is a fairly straightforward job, and it should only take about an hour or two. By following these simple steps, you can save yourself a lot of money and time.
You can detect the problem by observing the belt glazing. Typically, it occurs when the tensioner does not have enough spring tension. Another sign of a failed component bearing is excessive arm oscillation. Excessive chattering and oscillation indicate that the damper has worn out. If you notice excessive oscillation, you should replace the tensioner pulley. Otherwise, you might be dealing with a defective bearing.
A damaged or out-of-adjusted drive belt will make a squealing noise. This is due to the belt slipping on the pulleys. It is most noticeable when the car is first started in the morning. A damaged drive belt will also be hard to manipulate. The new belt should be the same length and width as the old one. You can check the tensioner by pulling the belt and compressing it.
A worn-out drive belt tensioner will result in unusual noise, excessive wear, and a loose belt. This is especially affecting if the car is equipped with a serpentine belt. The drive belt tensioner has a roller bearing that can wear out, which will cause a squealing noise or even cause the belt to roll off entirely. Because of its important role in engine operation, it is vital to check the condition of the drive belt tensioner on a regular basis.
While replacing a drive belt tensioner may seem like a simple DIY project, you should consult a mechanic before undertaking the work. The parts and labor costs of a drive belt tensioner repair can range from $140 to $400, and you should allow an hour for this repair. If you are not comfortable performing the repair yourself, you can always hire a mechanic to do it for you. In most cases, a drive belt tensioner replacement will cost approximately $70 to $80 and take about an hour.

Product Description

KEXIN Company Support you a better business with:
1.higher quality machine
2.factory price
3.professional service
4.accurate market analysis and suggestions for packing straps
 

Product Description

Polyester Strapping Hand Packaging Tools/Tool 

Product Information

Parameter
 

Features:
1.Aluminum base and handle.
2.Specially designed gripper that grips the textile strap without damage the surface.
3.Strong powder coating.
4.Case harden cutter and windlass.
 

Detailed Photos

Detials

Advantage

FAQ
1. What does the tool work for?
It is a packing tool,working on the plastic straps, for example, pp strap, pet strap. strap bale the carton, wooden case,pallet, or round steel coil. so, the tool can work there. But, it is only for strap tensioning, no, sealing. you need the seal and the sealer to work together.

2. What size of the strap does the tool apply for?

Strap width:13mm,16mm,19mm. thickness:0.4mm to 1.0mm. And remember it is plastic strap, not the steel strap.

3. Do you have stock for them?

Some of them, but, please check with us before ordering.

4. How many types of strapping tools do you manufacture ?
Basically, there are 3 types, manual, pneumatic and battery ( electric) .

5. Which type is popular?
It depends on the country you are from and what the market is.
 

The Advantages and Disadvantages of Neoprene Timing Belts

The timing belt is an important component of an automobile engine. Made of special materials, this belt coordinates the rotational motion of the crankshaft with the camshaft. The coordinated precision is essential for sustainable combustion, and ensures that the valves in the combustion chamber open at the right times. Timing belts determine the engine’s pace, so it is essential that they perform at high synchronicity and strong enough to operate in extreme conditions.

Fabric timing belt

A timing belt is made of a yarn that has been crimped and woven into a mating surface, called the engagement surface. This yarn, known as the warp, must be able to stretch from a substantially flat state along irregularities in the mold. It must be flexible enough to stretch by several tens of percent under low load conditions. The warp yarn of a timing belt is made of synthetic fiber and is crimped into the right shape to be stretched easily.
This fabric can be used without thickening the base cloth. It can contain a large number of warp threads, and its wear resistance can be enhanced over time. The timing belt of the present invention does not crack or wear out after a long time of use. The base cloth does not wear out, which allows the timing belt to last for a long time. This makes it an extremely durable material. To learn more, read on.
The teeth of a timing belt are made of tough rubber and a nylon fabric facing. The fabric is coated with a plastic compound that gives it its shape and covers the cord. The materials used to make these belts vary, but all are strong and durable. They are also suitable for high-load applications. In addition to nylon timing belts, strongbelt premiums are also available. In addition to nylon and neoprene timing belts, they are also compatible with RPP and HTD pulleys.
The teeth of timing belts are made of high-strength polychloroprene elastomer. The teeth are made of a special manufacturing process that ensures good adhesion. The facing fabric is made of low-elongation glass cord and is covered by a polyamide fabric that has a low coefficient of friction. If you need an exact fit, you can buy a high-quality belt from TransDev.

Neoprene timing belt

When it comes to dependable drive belts, neoprene is hard to beat. It’s widely used in insulated clothing and weather stripping, and has been a key component in the development of timing belts since the late 1970s. And because it’s so hardy, neoprene timing belts are incredibly reliable. Here are a few reasons why. Neoprene is the most durable synthetic material for timing belts, and these 3 reasons should not discourage you from purchasing a new neoprene timing belt.
Neoprene timing belts are made of a high-quality chloroprene compound with a hardness of 74 Shore A. The high-strength glass fiber strands in the belt’s body transmit high power while enhancing its flexural strength. In addition, it’s covered with a high-strength polyamide fabric to reduce friction and protect contact surfaces from wear and tear.
Unlike neoprene, polyurethane synchronous belts are resistant to temperature and abrasion. Polyurethane timing belts are resistant to acids and chlorides, and exhibit excellent abrasion resistance. A neoprene belt can be used in high-speed applications, and can withstand extreme temperatures. However, the resistance of polyurethane to abrasion is not as good as that of neoprene.
The 2 most common types of timing belts are rubber and urethane. Rubber is the least expensive and quietest, and is the least flexible of the two. Neoprene is also highly elastic and does not retain its shape when it’s stretched, making it a popular choice for applications in manufacturing, agriculture, and robotics. They are also great for applications where precision and motion control are important. These properties make timing belts extremely effective in leading the industry toward its goals.

Chain timing belt

Traditionally, a vehicle’s timing system consists of a timing belt or chain. These components keep the engine’s intake and exhaust valves in the proper order. When these components go bad, it can ruin the engine in seconds. But there are advantages and disadvantages to each of them. Read on to learn about the pros and cons of each type of timing system. Here are some examples. Chain: A timing belt is generally made of reinforced rubber.
Chain: A timing chain is generally found in heavy-duty vehicles with higher torque. This type of timing belt is also found on many cars and SUVs with 4 cylinder engines that do not require a lot of torque. Unlike timing belts, timing chains are more durable and will last longer than their rubber counterparts. But there are certain things to keep in mind when replacing a timing belt. Make sure to change the oil regularly to avoid premature wear.
Chain: A chain is easier to maintain than a timing belt. It does not change length in response to temperature. And it requires a smaller tensioner. However, this also means that the timing belt is more prone to breaking. It can jump out of place if oil is flowing along it, causing an engine malfunction. If this happens, you’ll have to replace the entire timing belt and the engine will not work correctly. That’s why replacing a chain is so important.
A timing belt is a critical part of an engine. A failed timing belt can cause catastrophic engine damage. It can slip and break, colliding with the piston and valves. Fortunately, there are a variety of ways to check your timing belt. But a good rule of thumb is to replace it as soon as possible. You’ll also need to remove the front engine cover and any other components that may be in the way. In some cases, the engine might even have to be moved.

Trapezoid shaped teeth

In terms of tooth profile, there are 2 main types of timing belts: the curvilinear and trapezoidal types. Curvilinear timing belts are more rounded and less likely to result in excessive tension loss. These types of timing belts are also more prone to backlash and reduce accuracy. Here’s how they differ from each other. These 2 types of belts share similarities but differ in important ways.
Older timing belts generally have trapezoidal-shaped teeth, but newer types use curved teeth. Curved teeth are less prone to wear out quickly and last longer than straight ones. The trapezoidal teeth also tend to wear out more quickly at higher speeds. As a result, they’re only suitable for cars that get very little use. If you’re planning on using your timing belt frequently, you may want to choose a new 1 with curved teeth.
Curvilinear teeth are designed to alleviate the stress concentrations caused by trapezoidal tooth profiles. They also have a greater depth and reduce ratcheting. In addition to their efficiency, curvilinear timing belts are quieter than their trapezoidal counterparts. And they’re a little bit more expensive than their trapezoidal counterparts. So, what’s the difference between these 2 types of teeth?
Timing belts have a tendency to favor the tracking of an “S”-shaped twist. As a result, a trapezoid-shaped timing belt is more likely to keep the engine in sync. A good quality timing belt will help you achieve this. If you don’t, consider replacing your timing belt with a metric-styled one. That way, you’ll get the best performance out of your belt.

Other types of timing belts

Timing belts are essential for operating your vehicle’s engine. These belts connect the engine’s crankshaft and camshaft. The belts synchronize the timing of the engine’s valves and pistons to prevent damage. Previously, the belt was referred to as the “gilmer drive belt.”
There are 3 basic designs for timing belts. Some are shaped like a trapezoid, while others have a curvy tooth shape. Timing belts with this tooth design are generally more efficient for force transmission, although they suffer from backlash. These teeth also wear quickly at high speeds, which can make them prone to noise. In order to solve these issues, manufacturers now offer belts with curved teeth.
Another popular type is polyurethane. These are resistant to oil and high temperatures, and are energy-efficient solutions. Polyurethane timing belts offer increased elasticity and load capacity, which are important for optimal torque production. These belts are favored by a variety of industries because of their ease of cleaning and maintenance. They can be used for power transmission systems, as well as in roller conveyor systems. However, fabric timing belts are best used when acceleration forces are high.
Other types of timing belts are not always as durable. V-Belts have teeth-like structures on their surfaces and work under constant speed. They are typically a lighter option, but have similar disadvantages. They are more expensive than chains and lack the flexibility of customizing. Unlike chains, timing belts are sold in predetermined length loops. Their pitch is easily identified. It is a key indicator of whether or not they are suitable for a specific application.